Icon Machine Tool, Inc.

USED EQUIPMENT

Do you have a machine to sell? Are you looking for a machine? Let us know and we will try to help. We work with people around the country to help you buy or move machinery. Simply print and complete our used equipment form, fax it back to us, and we'll get started.
For more info:
Free Adobe Acrobat Reader software.

The list changes frequently - check back often to see an updated list of available machines. Click the image to see an enlarged photo. Updated 8/19/2008.

	141JH - TRUMPF TruMatic 260A Rotation Punch. 1991, 28 Ton Capacity, Bosch CNC
	140JH - TRUMPF TC200R CNC Punch. 22 Ton Trumpf CNC Punch and Contouring Machine, 1995 Maximum Tonnage Capacity .............. 22 Tons Table Travel .....................................50" x 80" Maximum Sheet Thickness ................ 1/4" Maximum Punch Diameter ................ 3" Linear Table Speed .......................... 2900 IPM Strokes/Minute (1" Centers) ............. 240 Strokes/Minute (Contours) ............... 420 Tool Rotation ............................... ..01 Degree Equipped with: Trumpf Trumagraph CC-220 CNC Control Programmable Punch Head Rotation 15 Sta. Automatic Tool Changer On X-Rail (15) Tool Holder Cartridges (2) Material Work Holder Clamps
	139CB - Flow WMC2 4020 Waterjet (2004) – Twin Dynamic Paser ECL cutting system for taper free cutting. LESS THAN 3000 hrs! 13’ x 6-1/2’ cutting table, garnet removal system, abrasive hopper, additional abrasive cutting heads and water only cutting heads, water treatment system including digitally controlled hydraulic and cutting water chillers, large inventory of consumables, spare parts, waterjet brick, other accessories and Flowmaster control with latest version software and offline programming with additional seats.
	138JC - Amada H-3013 ½” x 10’ shear – 1983 model, Hydraulic Holddowns (14) , Footswitch , Single - Continuous - Inch Modes , 1 Meter CNC Preselect Power Back Gauge , Hinged Back Gauge Angle (Flips Up For Long Sheets) , Adjustable Stroke Control (15-50 SPM) , 20" Gap Frame All Steel Construction , One Shot Lubricating System , Electronic Stroke Counter , Light Beam Shearing Gauge , Emergency Stop Button , Power Operated Adjustment for Rake Angle Adj. And Blade Clearance Adj. , One (1) Squaring Arm , Two (2) Front Support Arms , 40 H.P. Motor & Control
	137JH - TRUMPF L2600 laser, S/N 2749. This unit has 1,235 beam on hours on the new resonator, 13,490 total hours and 4,621 machine on hours on the new resonator, 33,664 total machine hours. Torrit dust collector.
	136CM - TRUMPF L3030 laser. Model year 1998. Bosch Control, 3000 watt Resonator new in 2004, 5x10, 7,922 beam on hours on new resonator, 35,620 Laser on hours, Mezzanine install
	135TM - TRUMPF L2530. Model year 1996. The resonator was replaced in 2002 and has approximately 8,000 hours. It is a 2600 watt laser with a 4’ x 8’ table. The machine is under power and still being used today. It has been run for only one shift per day.
	134SS - FinnPower model LPE5 Laser Punch Combination Machine with Material Load, year 2003 installed in 2004.
	SOLD 133 - Amada Vipros 367, 1991, 30 ton, 60 x 72 roller table, Air blow, 04 PC Control Fanuc, 56 station, 2 AI, 54K on hours, 16K run hours.
	132JH - Amada Vipros 358 King, 1995, 30 ton, 50 x 80 brush table, Air blow, 04 PC Control Fanuc, 58 station with 4 AI, 32K on hours, 11K run hours, MP1225 Loader (may sell separately)
	SOLD 131 - Wysong Beyeler press brake, 12 foot, 168” bending length, X axis back gauge, Manual Z1 & Z2, Manual R Up and Down, CNC Crowning, CNC Control, 8” stroke
	SOLD 130 - TRUMPF Trumatic L6030, 3 KW, 1999, S/N 131065, Machine on hours=45,074, Beam on hours=21,405. 1999 - September 2002 Machine on 18,755 hours; beam on 9,851. New Resonator - 26,299 machine on hours; 11,554 beam on hours. Siemens 840D control.
	129TM - HemSaw Model V100 LA-2, 1998, 1-¼” blade, 18” x 20” capacity
	SOLD119 - Bystronic Bysprint 3000 watt 4 x 10, ByPos, automatic pallet changer, less than 9,000 hours, under power. Excellent condition.
	SOLD 125 - TRUMPF L3030 laser, 5x10 with 4kw. Manufactured in 12/2003. 5,975 beam-on hours and 12,755 machine-on hours. Available in January 2007. Selling the machine only.
	SOLD122 - Trumpf 3030 Laser, 4000 watt resonator, year 2000, Liftmaster Automation, 5x10 with shuttle table.
	121SS - FinnPower CNC punching machine, 1998, good condition, under power, includes lots of tooling.
	SOLD 118 - 2004 Beyeler/Bystronic PR press brake, 150 ton, 10 ft, equipped with Wila hydraulic clamping and tooling (Wila or Trumpf style). Very low hours, showroom condition. Cybelec control. Crowning. Under power, ready for immediate delivery.